Free and Total Chlorine analyzer

  1. Home
  2. Analyzer
  3. Free and Total Chlorine analyzer

Analysis of the amount of chlorine in the water

Digital chlorine regulator in water, with microprocessor adjustment decoder and backlit LCD display, measuring range from 0 to 2o mg/l. Automatic temperature compensation (probe excluded), 2 on-off set point and 1 digital proportional set point, alarm max. dosing, probe non-functioning alarm, with data memory up to 2,500 lines, pump alarm input and flow sensor, RS 485 output, in IP56 box.

The picture shows an example of Chlorine analyzer

Network connection:230V 50-60Hz (exactly: 90-240 Volt, 47-63 Hz)
Water temperature:max. 45°C
Water pressure:max. 6 bar
Current consumption:25 VA
Degree of protection
with mounting box:IP 56
Relay outputs:2 ON / OFF output, maximum load 250V 4A
1 proportional 0 (4) -20mA output
1 RS485 output
Alarm output:exceeding maximum dosage, sensor failure,
lack of water flow
Water quality to be analyzed:
Temperature:1° - 45° C
Optically:transparent, without color, without suspended substances, without air bubbles and CO2
Chemically:pH 4 - 10.5, iron <7ppm, copper <0.2ppm,
aluminum <0.1ppm, manganese <0.2ppm
acid capacity K S4.3 <5mmol / l
Water pressure:0,2-6 bar
Exhaust:without pressure (funnel)
Water inlet / outlet connection:flexible hose 8 mm outside diameter
Dimensions of the analyzer:
Plate with mounted analyzer (including a filter):28 x 52 x 15 cm (actual space needed 128 x 52 x 35 cm)
Filter17 x 16 x 13 cm (actual space needed 37 x 16 x 13 cm)
Measuring chamber:13 x 10 x 7 cm (actual space needed 23 x 15 x 7 cm)
Electronic:14 x 14 x 10 cm

Probes necessary for functioning:

Free chlorine probe 0 – 2 ppm

0 – 20 ppm



Total chlorine probe 0 – 2 ppm

0 – 20 ppm



Do you want to know more about the Chlorine Analyzer?

Contact us for any information

Contact us