Colorimetric analyzer, with microprocessor for water hardness control.
The device DUROMAT VI qualitatively controls softening plants, avoiding promblems caused by water hardness. to save: water, time and chemical products that would be used to carry out a regeneration of the plant.
There are available varous LEDs for functioning and results identification (good/not good water)
| Duromat VI Technical Data: | |
|---|---|
| Power connection: | 230V 50-60Hz (Exactly: 110-230 Volt, 47-440 Hz) |
| Power consumption: | 25 VA |
| Protection degree without lid: | IP 43 |
| Protection degree with lid (optional): | IP 56 |
| Weight without lid: | 2,1 Kg |
| Weight with lid: | 2,3 Kg |
| Dimensions without lid: | width x height x depth 260x360x60 mm |
| Dimensions with lid: | width x height x depth 280x360x110 mm |
| Amount of indicator in bottle: | 750 ml |
| Indicator consumption: | 7.500 analysis with 1 bottle (750ml) DUROMAT® VI basic: 3 months duration DUROMAT® VI with additional board: depending on interval, minimum 3 months |
| Output relays: | 2 outputs, maximum charge 250V 4A (Maximum value, alarm) |
| Input: | none With additional board: 1 output, maximum charge 18V 12mA |
| Analysis interval: | fixed With additional board: 10, 20 or 30 minutes |
| Washing time: | fixed With additional board: programable from 0,5 to10 minutes |
| Quality of water: | |
| Temperature: | 5° - 40° C |
| Optically: | transparent, without color, suspended substances, air, and CO2 bubbles |
| Chemically: | pH 4 –10.5, iron <3ppm, copper <0.2ppm, aluminum <0.1ppm, mangle <0.2ppm acid capacity K S4.3 <5mmol/l |
| Water pressure: | 0,5 - 5 bar (ate) |
| Drain: | without pressure (funnel) |
| Inlet/drain water connection: | 6 mm external diameter flexible pipe |
Contact us for any information
