Analyseur colorimétrique à microprocesseur pour le contrôle de la dureté de l’eau.
Exemple d’application : contrôle de la dureté de l’eau après un adoucisseur, pour la protection d’un système d’osmose inverse.
Analyseur DUROMAT IQ
Données techniques DUROMAT® IQ:
| Power connection: | 230V 50-60Hz (exactly: 85-264V, 47-63 Hz) 24V AC/DC |
| Current consumption: | 25 VA |
| Degree of protection on plate: | IP 463 |
| Degree of protection with box: | IP 56 |
| Weight mounted on a plate: | 2,5 kg |
| Weight mounted in box: | 3 kg |
| Dimensions mounted on plate: | 280x360x113 mm |
| Dimensions mounted in box: | 300x390x130 mm |
| Amount of reagent: | 500 ml |
| Inputs: | 2 inputs, maximum load 18V 12mA (STOP or START analysis, water meter |
| Relay outputs: | 4 outputs, maximum load 250V 4A (hardness alarm, hardness pre-alarm, failure, lack of indicator, analysis contact) |
| Other outputs: | 0 (4) -20mA hardness result or appliance operation MODBUS (CANBUS optional) SD card (results, errors) |
| Analysis interval: | programmable up 3 to 9.999 minutes |
| Washing time: | programmable up 0,5 to 10 minutes |
| Water temperature: | 5° - 40° C |
| Optically: | transparent, without color, without suspended substances, without air bubbles and CO2 |
| Chemically: | pH 4 -10.5, iron <3ppm, copper <0.2ppm, aluminium <0.1ppm, manganese <0.2ppm acid capacity K S4.3 <5mmol / l |
| Water pression: | 0,2-6 bar |
| Inlet / drain water connection: | 6 mm external diameter hose |
Voulez-vous en savoir plus sur le Duromat IQ?
Contactez-nous pour toute information
Contactez nous