Controls the pool wash valve, recirculation pump and, if present, wash pump.
The rinse pump is switched off during valve movement.
The pilot distributor has its own internal program (it does not need a programmer or PLC).
Programmable 6-phase pilot (5 regeneration phases).
Operation:
| Network connection: | 24 Volt 50-60Hz or 230/24V 50-60Hz |
|---|---|
| Command yield absorption: | 2,5 VA |
| Switching time: | 10 seconds |
| Protection class: | IP 54 |
| Synchronization: | included in the delivery |
| Command medium: | air or water (no foreign bodies) |
| Max pressure: | 8 bar |
| Test pressure: | 16 bar |
| Internal diameter of the pipe: | 2 mm |
| Room temperature: | from 5° to 40°C |
| Connection to the valves: | 6 |
| Filettatura:Thread: | 1/8 "female, thread length max. 10 mm |
| Peso:Weight: | 5, kg |
| Dimensions: | width. 400, height 390, depth 130 mm, |
| lasciare spazio a sinistra 50 | |
| Relay output: | 5, contacts n.a./n.c. |
| Supplementary program 1 and 2 | |
| Alarm | |
| dosage | |
| Operating valve | |
| without potential, max. 250V 1.5A 250VA initial load (Attention, do not exceed the maximum load of the transformer) | |
| Analog output: | 4-20mA galvanically divided (max. Load 250 ohm) |
| Entries: | 5 n.a. |
| Regeneration stop | |
| Start or Stop regeneration | |
| Operating valve | |
| Hold regeneration | |
| Interference filter: | including (EMI type) |
| Internal transformer: | 9-12V 50-60Hz |
| Internal motor voltage: | 12V 50-60Hz |
| Counts regenerations: | included |
| Certifications: | CE e RoHS |
Contact us for any information
