With result display
Type of analysis: Galvanic
Field of application: power plants, boilers, denitrization plants (remove NH3 in drinking water)
Measuring range
0.10 ppb – 20 ppb
0 – 20 ppm
Dissolved oxygen analyzer 9062
Technical data
| Type of analysis: | amperiometric |
| Network connection: | 220-240V 50-60Hz, 10VA |
| Environment humidity: | max. 90% without condensate |
| Environment temperature: | 0 - 55 °C |
| Water temperature: | 1 - 60 °C |
| Temperature compensation: | automatic |
| Water pressure: | 0,3 – 8 bar |
| Analysis accuracy: | +/- 3% of the measured value |
| Water quality: | transparent, without suspended substances, pH 3-12 |
| Conductivity in the water: | over 10 uS/cm (under ask for particular cell) |
| Dimension | 215 x 242 x 73mm |
| Certifications: | EMC e CE |
| Analysis time: | 30 seconds |
| Alarms: | water flow calibration, power failure |
| Analogic output: | 0(4) – 20mA |
| Digital output: | RS 232 |
| Protection degree: | IP54 |
| Instruction for use: | english, italian |
| Display: | english |
| Accessory: | prefilters (recommended) cleaning set water cooler for temperature up to 80°C water cooler for temperature up to 120°C water cooler for temperature over 120°C |
Want to know more about the 9062 Dissolved Oxygen Analyzer?
Contact us for any information
Contact us