Type of analysis: amperometric
with display of result
Usage: power systems, boilers, denitration plants (remove NH3 in drinkable water)
Measure range
Technical data
| Type of analysis: | amperometric |
| Connection to the network: | 220-240V 50-60Hz, 10VA |
| Environment humidity: | max. 90% without condensate |
| Environment temperature: | 0 - 55 °C |
| Water environment: | 1 - 60 °C |
| Temperture compensation: | automatic |
| Water pressure: | 0,3 – 8 bar |
| Analysis precision:+/- 3% of the measured n value | :+/- 3% of the measured value |
| Water quality: | transparent, without suspended substances, pH 3-12 |
| Water conductivity: | over 10 uS/cm (below ask particular cell) |
| Dimension: | 215 x 242 x 73mm |
| Certification: | EMC e CE |
| Analysis time: | 30 seconds |
| Alarms: | water flow, calibration, power failure |
| Analogic output: | 0(4) – 20mA |
| Digital output: | RS 232 |
| Protection degree: | IP54 |
| Instruction of use: | inglese, italiano |
| Display: | inglese |
| Accessories: | prefiltri (consigliati), set di pulizia, raffreddatore per temperature fino a 80°C, raffreddatore per temperature fino a 120°C, raffreddatore per temperature oltre 120°C |